Category 2

  • The Mark 2 will transmit data in any location with at least two bars of cellular connectivity.
  • Every five minutes, the Mark records data measurements. These are aggregated every hour and delivered to the customer on an hourly or daily basis, depending on the measurement taken.
  • Callibration of the Mark 2 is all automatic.
  • Arable calibration is supported by a global network of 30+ sites covering a wide range of agricultural climate zones. Data collected by the network uses machine learning to automatically calibrate and validate all Mark 2 measurements.

Category 1

We don’t recommend a distribution based on hectares. We recommend one Arable Mark per: Management Zone: This could be based on field, ranch, or irrigation scheme. Choose a resolution of distribution that can help you make decisions and act accordingly. Crop or Varietal Type: The Arable Mark measures canopy growth, health, stress, and more. These measurements will vary between crop type or varietal. While you could be growing apples and oranges in the same microclimate, they behave differently to the same environment, and that will show up in our plant-based measurements. Choose a location that is representative of conditions or not! Representative of crop conditions More or less vigorous Where frost occurs Where disease outbreaks first occur Calculator: Number of microclimates x # of crops/varieties (eg.6 x 2 = 12 Arable Marks) or number of management zones.

  • Gently wipe off the dome of your device with a damp, soapy cloth, ensuring that there are no suds leftover. Dusty terrain or spray events may require more frequent cleaning.
  • The Mark 2 looks at a circular area below it, with a diametre that is twice its mounted height.
  • The Arable Bridge is available as an auxiliary connector that enables integration with other devices, such as flow metres, pressure gauges, soil moisture probes, and wind speed sensors.

<li>If the Mark 2 can perch above the canopy, it can measure the vegetation below it.</li>